Link:
http://www.mediafire.com/?ui9hy548e1zh5xx
Cách sử dụng engine KOU 1.0.1.8 cho Gui Cyclone và Xboard:
By default, the engine reads a configuration file file name _KOU.ini, for example, if the engine file named KOU1018.EXE he will read KOU1018_KOU.ini
If not, then this file will automatically generate a
Interface to run in the words of cyclone
Please change the engine name from KOU1018.EXE
KOU1018_KOU.ini into cyclone_KOU.ini
And modify cyclone_KOU.ini inside:
[System]
; Tornado Interface Set to 1 (Not tested .. Heaven interface may also be used 1)
; Xboard ucci series interface or interfaces (such as chess wizard) Set to 0
Protocol = 1 <== changed from 0 to 1
The following instructions for each parameter
[System]
; Tornado Interface Set to 1 (Not tested .. Heaven interface may also be used 1)
; Soldiers Creek Fourth ucci series interface or interfaces (such as chess wizard) Set to 0
Protocol = 0
; This setting will make up to the main engine behind the name
; Specific use is, if you want to test different settings thinking depth difference KOU
; Then if not this, then because of the name are the same, when the game results to see which is which
EnginePostfixName = 1 is used, 0: not to use
; Interface settings are not supported by the library to use or not start, start the engine before the value of manual adjustment UseBook
; Set the way for a similar line by line as follows can be added to the KOU1018_KOU.BOK
; Rnbakabnr/9/1c5c1/p1p1p1p1p/9/9/P1P1P1P1P/1C5C1/9/RNBAKABNR w - - 0 1 moves h2e2
; Rnbakabnr/9/1c5c1/p1p1p1p1p/9/9/P1P1P1P1P/1C5C1/9/RNBAKABNR w - - 0 1 moves g3g4
; Rnbakabnr/9/1c5c1/p1p1p1p1p/9/9/P1P1P1P1P/1C5C1/9/RNBAKABNR w - - 0 1 moves g0e2
; Rnbakabnr/9/1c5c1/p1p1p1p1p/9/9/P1P1P1P1P/1C2C4/9/RNBAKABNR b - - 0 1 moves h9g7
UseBook = 0
; Less than or equal to 0, then let the engine decide that the number of configuration
Threads = 0
; Less than or equal to 0, then let the engine decide that the number of configurations, unit MB
HashSize = 0
; Set to 1, then said they would ignore the interface given by setoption threads
; If set to 0, it will not bother ... the engine will follow the above settings to determine Threads a few threads running
; So if you want to measure single-core KOU KOU vs multi-core engine .. can a league set to 0, a set to 1, so it will not be affected by setting a unified interface
EnableSetOptionThreads = 1
; Above principle
EnableSetOptionHashsize = 1
; Do not change, otherwise an exception may occur
Seed = 2733860685
Please change the engine name --> KOU1018.EXE
KOU1018_KOU.INI:
[System]
Protocol=1
EnginePostfixName=
EnableSetOptionThreads=1
EnableSetOptionHashsize=1
UseBook=0
Threads=2
HashSize=256
Seed=2733860685
cyclonegui.ini:
[engine]
EngineFileName=KOU1018.exe
NormalPriority=0
DebugLog=0
AllowMoveGear=0
YtAuto=0
BookAuto=0
Log Off
Engine này thủ rất chắc, tấn công khá giống Intella.Chỉnh Threads=4 nếu dùng Quad core
Dạo này đang nghiên cứu cách sử dụng Chess Wizard, thấy có nhiều tính năng hay, khi hoàn chỉnh se gửi lên cho anh em.
, nhưng Point vẫn tăng đều.Mình test ngoài thường chỉ test 1 đoạn trung hay tàn cuộc.Còn với ai dùng Cyc hay GG thì khác khá nhiều,nhất là những ai dùng PC 4-8U thì nó kém hơn, vì mình chỉ xài PC 2U.1 chiến hữu test thử mấy ngày đầu o MXQ thấy win cũng khá nhiều.
