Cần giúp đỡ về Write Protected USB

dark_dragons

Hyperion Captain
‍ ⚚ Mystic Mage ⚚
Moderator
Lão Làng GVN
Chào mọi người,

Tình hình là không phải USB của mình, mà của một người bạn. Dính virus, đem ra tiệm mò mẫm kiểu gì, mà bây giờ nó bị... Write Protected luôn :(

Đã kiểm tra, không có lock trên cái USB.

Đã thử qua các cách phổ thông như dùng Registry Editor để tắt Write Protect, dùng Cmd để... force format. Nhưng không được.

Có thể vấn đề là bị Write Protect.

Có bạn nào biết cách giải quyết cho vụ này hoặc vấn đề tương tự, thì hướng dẫn mình với nha! :D
 
Nếu không phải do phần cứng thì dùng phần mềm HP USB Disk Storage Format Tool để tiến hành format lại:

Mã:
http://www.softpedia.com/get/System/Hard-Disk-Utils/HP-USB-Disk-Storage-Format-Tool.shtml
 
Same problem :D

usb.png
 
Thử kéo đẩy cái nút Write Protected trên usb xem, kéo rồi vào test, k dc thì lại đẩy rồi vào test :)
Nếu k dc thì có thể USB bị dính chưởng rồi, hoặc cũng có thể là nó bị Write Protected do phần mềm
Làm theo các hướng dẫn sau

Try the registry edit, Navigate to the following registry key: HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies. Change the value for the key "WriteProtect" to 0

go into command prompt then type "diskpart" type "list volume" then "select volume xxx" (where xxx is the write protected problem drive) then type "attributes volume clear readonly"

Mã:
Shut-down your machine.
Insert the Memory Stick. Turn on and start pressing the F8 key
Select Safe Mode with Command Prompt
Type [B]C:\windows\system32>XXX:[/B] (where xxx is the write protected problem drive) and press enter
Then type [B]XXX:>format XXX:[/B] and press enter
Press (Y) if prompted and press enter
A full format will start and the write protection will be removed.
 
Chỉnh sửa cuối:
- Không tìm thấy lock trên USB.
- Đã kiểm tra, sử dụng cách add StorageDevicePolicies vào và sửa thành 0 vẫn không thành công.
- Đã có sử dung CMD, CMD (Admin), Safe Mode CMD và Attributes volume clear readonly, đều không được. Sau khi Clear Attributes, khi tớ dùng lệnh Format thì lát sau vẫn báo I/O missing gì đó, hoặc Write Protected.
 
diskpart mạnh vậy mà k ăn thua gì thì thua rồi =)
1 là thằng sửa nó protected = 1 phần mềm bảo mật nào đó cao tay
2 là usb đi bụi rồi =)
 
Back
Top