- 10/8/06
- 2,182
- 7
- Thread starter
- #41
AFS2FS.dll 7.1.0.6
Master Juce have done it again! This is an experimental kitserver module. It allows to organize your BIN-files into folders on disk, instead of inserting them into AFS(*.img) files, which is sometimes a pain, and may require a lot of extra disk space.!!!!!!!!
Str@teG came up with this idea of organizing BINs into folders, and now it is possible using this new module - afs2fs.dll. I know that personally i was often reluctant to install some patches that required an AFS-rebuild, not because it's difficult or anything, but because it can be time-consuming and disk-space-hungry. With afs2fs, this is now very easy: you just put the BIN into correct folder and that's it. Obviously, there are no size constraints - the bins can be as large as needed.
DOWNLOAD (234K)
http://slil.ru/25392205
http://files.filefront.com/afs2fs+710ezip/;9493725;/fileinfo.html
http://www.speedyshare.com/766404312.html
http://rapidshare.com/files/86049369/afs2fs-710e.zip.html
How to install:
1. You will need a kitserver 7 (doesn't have to be the latest version though)
2. Put afs2fs.dll into kitserver folder - alongside other DLLs.
2. In kitserver folder, create a new folder named img, and then inside that one, create folders, as needed, named - cv_0.img, cv_1.img, rs_e.img, and so for. That's where you're going to be putting the BIN-files. (It's important to name the folders correctly: a folder must have exactly the same name as the corresponding AFS-file. For instance, if you call a folder cv_0, instead of cv_0.img, things will not work.).
See readme.txt and the example with Del Piero's face.
3. In config.txt, add a line to load afs2fs.dll:
4. Together with the afs2fs.dll, there's an example with cv_0.img folder, and faces_1951.bin (Del Piero's face, made by Ronie). You can name the files whichever way you want, but you must follow one rule: there must be a BIN number in the name, and it must be preceded by an underscore character ('_').
Examples of correctly named files:
faces_1951.bin
unnamed_40.bin
balls_7.bin
unknow_8 (.bin extension is optional)
Examples of incorrectly named files:
unnamed10.bin - no underscore symbol before the BIN number.
face.bin - no BIN number.
Master Juce have done it again! This is an experimental kitserver module. It allows to organize your BIN-files into folders on disk, instead of inserting them into AFS(*.img) files, which is sometimes a pain, and may require a lot of extra disk space.!!!!!!!!
Str@teG came up with this idea of organizing BINs into folders, and now it is possible using this new module - afs2fs.dll. I know that personally i was often reluctant to install some patches that required an AFS-rebuild, not because it's difficult or anything, but because it can be time-consuming and disk-space-hungry. With afs2fs, this is now very easy: you just put the BIN into correct folder and that's it. Obviously, there are no size constraints - the bins can be as large as needed.
DOWNLOAD (234K)
http://slil.ru/25392205
http://files.filefront.com/afs2fs+710ezip/;9493725;/fileinfo.html
http://www.speedyshare.com/766404312.html
http://rapidshare.com/files/86049369/afs2fs-710e.zip.html
How to install:
1. You will need a kitserver 7 (doesn't have to be the latest version though)
2. Put afs2fs.dll into kitserver folder - alongside other DLLs.
2. In kitserver folder, create a new folder named img, and then inside that one, create folders, as needed, named - cv_0.img, cv_1.img, rs_e.img, and so for. That's where you're going to be putting the BIN-files. (It's important to name the folders correctly: a folder must have exactly the same name as the corresponding AFS-file. For instance, if you call a folder cv_0, instead of cv_0.img, things will not work.).
See readme.txt and the example with Del Piero's face.
3. In config.txt, add a line to load afs2fs.dll:
Mã:
[kload]
dll = zlib1.dll
dll = libpng13.dll
dll = kserv.dll
dll = lodmixer.dll
[b][COLOR="Blue"]dll = afs2fs.dll[/COLOR][/b]
[lodmixer]
...4. Together with the afs2fs.dll, there's an example with cv_0.img folder, and faces_1951.bin (Del Piero's face, made by Ronie). You can name the files whichever way you want, but you must follow one rule: there must be a BIN number in the name, and it must be preceded by an underscore character ('_').
Examples of correctly named files:
faces_1951.bin
unnamed_40.bin
balls_7.bin
unknow_8 (.bin extension is optional)
Examples of incorrectly named files:
unnamed10.bin - no underscore symbol before the BIN number.
face.bin - no BIN number.
Save.. Có thấy cái file Pes_Edit01 nào đâu. thì làm sao mà mở lên được
Vòa edit thì chỉnh cái gì chả được, cập nhật chuyển nhượng, thay đổi kiểu tóc mới cho cầu thủ (vd như Ferdinand để tóc ngắn).v.v... Xong thoát về Menu thì nó cho phép bạn save lại những gì đã thay đổi. Đó chính là file bạn cần. Thoát ra khỏi game vào My Documents\KONAMI\Pro Evolution Soccer 2008\save sẽ thấy ngay PES2008_EDIT01
