Shift+F1
Displays all the hotkey commands. May be different from what is in the hotkey file if it is edited.
Shift+F2
Show Current AI Info - Displays current AI settings.
Shift+F5
Toggle Auto-Buff - Default=OFF. Scout/Viki with fortitudo will automatically perform buffs with a modifiable delay. Ensure fortitudo is the current stance before activating auto-buff. There are 3 settings: Int/Accel/Medi, Int/Fort/Medi, and OFF.
Shift+F8
Toggle Viki Auto-summoning Skill Slot - Default=0. Change which golem Viki will auto-summon when auto-summoning is on. Options go from 0 - 4 where each number indicates a skill slot (0 = Summon Tary). Make sure to set this to the correct skill slot before turning on auto-summon as Viki will immediately start summoning whichever golem's skill slot is selected here.
Shift+F9
Toggle Auto-Summoning for Catherine, Jack, Angie, Yeganeh, Viki - Default=OFF. Catherine=Marionette, Jack/Angie=Construction, Yeganeh=DefensiveConstruction, Viki=Amicus/Castis. Make sure to set the characters to the appropriate stance before turning auto-summoning on. Also good idea to turn on auto-patrol, as they need to be in patrol mode for auto-summon to work.
Shift+F10
Toggle Jack/Angie/Yeganeh Fence Construction - Default=OFF. Set whether or not they will construct fences while auto-summon is on.
Shift+F11
Toggle Jack/Angie/Yeganeh Support Wards Construction - Default=OFF. Set whether or not they will construct support wards while auto-summon is on.
Shift+0
Reset AI to default settings - with the whole team selected, press Shift+0. If they were all idle, settings will be reset. If they were not, then click somewhere to move all your characters (so that they become idle). Reset will be complete once characters hit the destination where you clicked. When reset is complete, you should see the "[AI] Initialized" etc message appear.
Shift+1
Toggle Auto-Looting - Default=OFF. Characters will automatically harvest items based on a set time interval and radius from where they're standing.
Shift+2
Toggle Auto-Potion - Default=OFF. Characters will automatically use potions when HP is below a certain threshold.
Shift+4
Toggle Auto-Patrol - Default=OFF. When auto-patrol is on, characters will remain in patrol mode, even when knocked down or when you move them. It's a good idea to already be in patrol-mode before turning on auto-patrol.
Shift+5
Toggle Auto-Keep - Default=ON. When auto-keep is on, characters will stay within a set radius of their patrol position. (Keeps characters from chasing an enemy across the map).
Shift+8
Toggle Sub-Healing - Default=ON. When sub-healing is on, characters with Heal skill (emilia, sage, soho, scout, viki) will automatically heal even with a weapon equipped.
Shift+D
Toggle Keep Distance - Default=800. Changes how far characters will wander from their patrol position before returning. (Keeps characters from chasing an enemy across the map). Range is from 0 to 2000.
Shift+L
Toggle Auto-Looting Range - Default=500. There are 3 settings: 500, 1000 and 2000 (where 1000 is approx rifle range).
Ctrl+Shift+L
Toggle Auto-Looting Delay - Default=100. There are 3 settings: 1 (instant), 100 (~10s) and 200 (~20s).
Shift+M
Toggle Auto-Buff Delay - Default=2500. Actual time may vary on different machines, adjust until you find a delay that works well for you. Range is from 500 to 10000 in increments of 500.
Shift+O
Toggle ranged acquisition distance - Default=1600. For ranged characters, will change the distance they acquire targets (ie. "see" an enemy and attempt to attack). Currently, ranged characters are set to: Grace, Infantry, Musk, Lorch, Brunie, Shariff. All other characters are considered melee. Goes from 1000 to 1800.
Shift+P
Toggle melee acquisition distance - Default=1000. Same as ranged acq distance but for melee characters. Goes from 1000 to 1400.
Shift+Q
Toggle auto-potion threshold - Default=60%. By performing Shift+Q multiple times, you can toggle this threshold between 35% and 75% in 5% increments.